Abstract

The separation of particles in keeping with shape is important for improving the standard of powder products. the form of a particle significantly affects its bulk properties. Various kinds of shape separators reported up to now are reviewed during this paper to supply useful information when choosing the foremost effective one, and also the separation mechanism and features are compared. Problems within the further development of the technique are explained.

Keywords

• synthetic polymer,
• Nano cellulose,
• packaging industry,
• laboratory PFI mill,
• ; high aspect ratio nano-cellulose fibers

References

• J. K. Beddow, Chem. Eng., 10 (1981) 7.
• J. K. Beddow, Particle characterization in Technology, vol. 2, CRC Press, Boca Raton, FL, 1984.
• K. Yamamoto and M. Sugimoto, .I. Sot. Powder Technol. Jpn., 22 (1985) 3.
• M. Nakagawa, M. Furuuchi, M. Yamahata, K. Gotoh and J. K. Beddow, Powder Technol., 44 (1985) 195.
• M. Furuuchi, E. Ohno and K. Gotoh, A&. Powder TechnoZ., I (1990) 89.
• K. Shinohara, Powder Technol., 48 (1986) 15.
• F. G. Carpenter and V. R. Deitz, J. Res. Nat. Eur. Stand., 47 (1951) 139.
• G. S. Riley, Powder Technol., 2 (1968/69) 315.
• E. Klar, Powder Technol., 3 (1969/70) 313.
• M. Sugimoto and K. Yamamoto, .I. Res. Ass. Powder Technol. Jon., 8 (1971) 35.
• M. Sugimoto; K. Yamamoto and J. C. Williams, J. Chem. Eng. Jpn., 10 (1977) 137. K. Yamamoto and M. Sugimoto,
• .I. Sot. Powder Technol. Jpn.,
• K. Yamamoto and M. Sugimoto, .I. Sot. Powder Technol. Jpn., 16 (1979) 521. S. Endoh, Y. Kuga,
• J. Koga and K. Yamaguchi, Kagaku Kogaku Ronbunshu, 8 (1982) 476. S. Endoh and K. Yamaguchi, J. Chem. Eng.
• Jpn., I7 (1984) 21. K.
• Yamamoto and M. Sugimoto, J. Sot. Powder Technol. Jpn., 22 (1985) 626.
• (1979) 521. S. Endoh, Y. Kuga, J. Koga and K. Yamaguchi, Kagaku Kogaku Ronbunshu, 8 (1982) 476. S. Endoh and
• K. Yamaguchi, J. Chem. Eng. Jpn.,
• (1984) 21. K. Yamamoto and M. Sugimoto, J. Sot. Powder Technol. Jpn., 22 (1985) 626.
• K. Yamamoto and M. Sugimoto, .I. Sot. Powder Technol. Jpn., 22 (1985) 813.
• K. Viswanathan, S. Aravamudhan and B. P. Mani, Powder Technol., 39 (1984) 83. S. Aravamudhan, N. Premkumar,
• S. S. Yerrapragada, B. P. Mani and K. Viswanathan, Powder Technot., 39 (1984) 93.
• M. Sugimoto, Funsai, 31 (1987) 40.
• K. Yamamoto, T. Tsukada and M. Sugimoto, J. Sot. Powder Technol. Jpn., 26 (1989) 12.
• K. Yamamoto and M. Sugimoto, Proc. Spring Meet. Sot. Powder Technol. Jpn., Kyoto, May 30-31, 1989, pp. 18.
• H. Ohya, S. Endoh, M. Yamamoto, H. Iwata, and H. Nakamura, Proc. Spring. Meet. Sot. Powder Technol. Jpn.,
• Kyoto, 1991, pp. 183.
• M. Furuuchi and K. Gotoh, Proc. 15th Fine Particle Sot. Meet., Orlando, FL, July 28-31, 1984, pp. 74.
• M. Furuuchi, E. Ohno and K. Gotoh, Adv. Powder Technol., 1 (1990) 101.
• B. Waldie, Powder Technol., 7 (1973) 244.
• M. Furuuchi, M. Nakagawa, M. Suzuki, M. Tsuyumine and K. Gotoh, Powder Technol., 50 (1987) 137.
• M. Furuuchi and IL Gotoh, Powder Technol., 54 (1988) 31.
• Ph. H. Kuenen, Developments in Sedimentology, vol. 1, Elsevier, Amsterdam, 1964, pp. 207.
• E. Abe and H. Hirosue, J. Chem. Eng. Jpn., 15 (1982) 323.
• Taniguchi, M. Sakata, Y. Suzuki and Y. Osanai, Trans. Sot. Mech. Eng. Jpn., 28 (1962) 485.
• K. Shinohara, T. Maenami and T. Tanaka, Part. Sci. Technol., 4 (1986) 161.
• K. Ridgway and R. Rupp, J. Pharm. Pharmac., 21, suppl. (1969)30.
• K. Ridgway and J. B. Scotton, Sedimentology 20 (1973) 263.
• C. P. Lenn and C. B. Halt, in N. G. Stanley-Wood and T. Allen (eds.), Particle Size Analysti 1981, Wiley Heydon,
• , pp. 233.
• H. Iwata, H. Ohya, K. Masuda, M. Yamamoto and S. Endoh, Proc. Spring Meet. Sot. Powder Technol. Jpn., Kyoto,
• May 28-29, 1991, pp. 178.
• W. H. Glezen and J. C. Ludwick, J. Sediment. Petrol., 33 (1963) 23.
• G. Rittenhouse, Znd. Eng. Chem., 15 (1943) 153.
• J. C. Ludwick and P. Henderson, Sedimentology, I1 (1968) 197.
• T. A. Roberts and J. K. Beddow, Powder Technol., 2 (19681 69) 121.
• Y. Nakajima, W. J. Whiten and M. E. White, Trans. Inst. Min. MetalL Sect. C, 87 (1978) 194.
• S. Endoh, J. Koga and K. Yamaguchi, .I. Sot. Powder Technol. Jpn., 20 (1983) 8.
• S. Endoh, J. Koga and K. Yamaguchi, Kona, 2 (1984) 7.
• S. Nakayama, T. Shibata and K. Yamaguchi, Proc. 25th Forum on Powder, Sapporo, 24-26 Sept., 1987, pp. 188.
• N. B. Hsyung, J. K. Beddow and A. F. Vetter, Proc. 8th Powder and Bulk Solids Con$, Rosemont, IL, 1983. 45 K. W.
• Monts, J. K. Beddow and A. F. Vetter, Proc. 9th Powder and Bulk Soli& Con$, Rosemont, IL, 1984. 46
• A. F. Vetter and P. A. Swanson, Part. Sci. Technol., 1 (1983) 127.
• T. P. Meloy, N. N. Clark, T. E. Dumey and B. Pitchmani, Part. Sci. Technol., 2 (1984) 259.
• T. P. Meloy, N. N. Clark, T. E. Dumey and B. Pitchmani, Chem. Eng. Sci., 40 (1985) 1077.
• N. N. Clark and T. P. Meloy, Powder Technol., 54 (1988) 271. 50 C. Orr, Powder Technol.,(1987) 217.
• M. Furuuchi, C. Yamada and K. Gotoh, Proc. 2nd World Cong. Part. Technol., Kyoto, Sept. 19-22, 1990, p. 151.
• M. Furuuchi, C. Yamada and K. Gotoh, submitted to Powder Technol.
• S. Sano and S. Yashima, Proc. Spring Meet. Sot. Powder Technol. Jpn., Osaka, May 26-27, 1987, p. 1.
• S. Sano and M. Nikaidoh, Proc. 2nd World Cong. Part, Technol., Kyoto, Sept. 19-22, 1990, p. 214.
• S. Sano, F. Saito and S. Yashima, Kagaku Kogaku Ronbunshu, 10 (1984) 17.
• S. Sano and S. Yashima, Proc. Spring Meet. Sot. Powder Technol. Jpn., Osaka, May 26-27, 1987, p. 5.
• H. W. King, C. 0. Wisler and J. G. Woodburn, Hydraulics, 5th edn., Krieger, Malabar, FL, 1980, p. 306.
• C. N. Davies, J. Aerosol Sci., 10 (1979) 477.
• C. Murali, B. Pitchmani and N. N. Clark, Znt. J. Min. Process., 18 (1986) 237.
• S. Endoh and H. Iwata, Proc. 24th Autumn Meet. Sot. Chem. Eng. Jpn., Nagoya, Oct. 16-18, 1991, p. 404.
• MASAMI FURUUCHI, KANAZAWA UNIVERSITY | KINDAI • GRADUATE SCHOOL OF NATURAL SCIENCE AND
• TECHNOLOGY
• III . PROFESSOR

This work is licensed under a Creative Commons Attribution 4.0 International License.